Question 1

Does the height of the cabinet in the design tool include the legs?

Accepted Answer

Yes, the height of the cabinet includes the legs.

Question 2

How to screw cabinets to each other?

Accepted Answer

We highly recommend the cabinets to be screwed together to avoid any movement or gaps between cabinets. We provide MS-8MMX1.125WSCR Drawer Front Screw to attach the cabinets. The screws should be placed in the front of the cabinets. One screw on top front corner of the cabinet and the front bottom of the cabinet (like show in the picture below).

Question 3

What type of screws can be used to screw the cabinets to the wall?

Accepted Answer

Length and type of screws depend on the type of wall construction.

If the wall construction is cement, then use a TapCon brand cement screw, making sure the screw goes into the concrete a minimum of 1".

If the wall construction is wood studs and drywall we recommend Washer head or Wafer Head cabinet screws available at one of the home centers. The screw must go at least 1" into the wood stud (this dimension does not include any sheeting or drywall that may be over the studs, you must add extra length for sheeting). Keep in mind that there may be more than one layer of drywall on the wall, this is especially true for the wall between the garage and the house if the garage is attached. Code in many areas requires two layers of drywall to create a fire wall between the garage and the house.

GRK
Spax
Hillman
Fastcap

Question 4

How do you install the slatwall?

Accepted Answer

Click here to find the instructions on how to install the slatwall.

Question 5

How can I cut the slatwall?

Accepted Answer

You can cut the slatwall with a sabre saw/jigsaw or any circular chop saw like a table saw blade or any wood working saw.